No | Item | Parameter | Note |
1 | Suitable Material | Type | Single Deck Trapezoidal rib roof panel Metal Tile Roll Forming Machine |
Customized Specs Acceptable,
Single Deck Trapezoidal rib roof panel Metal Tile Roll Forming Machine |
| Customized Profile |
Thickness | 0.3-0.8mm |
Yield Strength | 235-550mpa |
2 | Product Specs | Cover width | Customized Profile |
|
Length | Any length |
|
3 | Power Specs | voltage | 380V/3PH/50HZ ( can customize) | Up to Practical Profile |
Main Motor | 5.5KW |
Hydraulic | 3 or 4KW |
4 | Machine Specs | Transmission | Chain and Sprocket | Gearbox and Cardan Acceptable |
Structure | Column Block Or Wall Plate |
|
Shafter | No.45 steel tempered |
|
Rollers | No.45 steel chrome coated | Cr12 or other acceptable |
Cutting Blade | Cr12 quenched |
|
Press Mould | Cr12 quenched |
|
Punch Mould | Cr12 quenched |
|
5 | Working Capacity | Forming Speed | 15-20m/min for standard solution | Higher Speed Solution Available |
Working Speed | Up to Length-set Cutting |
6 | Hydraulic Cantilever Decoiler (Optional) | Type | Hydraulic |
|
Max. Capacity | 5 T/10T/15T |
|
Suitable coil | 914mm,940mm,1000mm,1200mm,1220,1250mm |
|
Suitable coil ID | 508/610mm |
|
Max Coil width | 1250mm |
|
7 | Forming ;Stand | 15 steps | Up to Practical Profile |
8 | Forming Shaft Diameter | 55-120mm | Up to Practical Profile |
9 | Type of Cutting | Length-set cutting after roll formed,CR12 mould teel | Pre-cutting acceptable |
10 | Control System | Mitsubishi PLC and Inverter |
|
11 | Output Supporter | 2 Pcs Simple Supporter | Auto Stacker Optional |