Twin-Rib Roof and Wall profile forming machine
No | Item | Parameter | Note | |
1 |
Suitable Material
| Type | Single Deck Trapezoidal rib roof panel Metal Tile Roll Forming Machine |
Single Deck Trapezoidal rib roof panel Metal Tile Roll Forming Machine |
Customized Profile | ||||
Thickness | 0.3-0.8mm | |||
Yield Strength | 235-550mpa | |||
2 | Product Specs | Cover width | Customized Profile | |
Length | Any length | |||
3
| Power Specs | voltage | 380V/3PH/50HZ ( can customize) | Up to Practical Profile |
Main Motor | 5.5KW | |||
Hydraulic | 3 or 4KW | |||
4 | Machine Specs | Transmission | Chain and Sprocket | Gearbox and Cardan Acceptable |
Structure | Column Block Or Wall Plate | |||
Shafter | No.45 steel tempered | |||
Rollers | No.45 steel chrome coated | Cr12 or other acceptable | ||
Cutting Blade | Cr12 quenched | |||
Press Mould | Cr12 quenched | |||
Punch Mould | Cr12 quenched | |||
5 | Working Capacity | Forming Speed | 15-20m/min for standard solution | Higher Speed Solution Available |
Working Speed | Up to Length-set Cutting | |||
6 | Hydraulic Cantilever Decoiler (Optional) | Type | Hydraulic | |
Max. Capacity | 5 T/10T/15T | |||
Suitable coil | 914mm,940mm,1000mm,1200mm,1220,1250mm | |||
Suitable coil ID | 508/610mm | |||
Max Coil width | 1250mm | |||
7 | Forming ;Stand | 15 steps | Up to Practical Profile | |
8 | Forming Shaft Diameter | 55-120mm | Up to Practical Profile | |
9 | Type of Cutting | Length-set cutting after roll formed,CR12 mould teel | Pre-cutting acceptable | |
10 | Control System | Mitsubishi PLC and Inverter | ||
11 | Output Supporter | 2 Pcs Simple Supporter | Auto Stacker Optional |